Steiner's Audio Video

208-746-3381

SnapAV Episode® Passive 8" In-Wall Subwoofer

At a Glance

The ES-SUB-IW-SNGL8 is the perfect solution for both retrofit and new construction applications. Built around the same world-class 8" Woven Fiberglass woofer that is found in its larger dual 8 sibling, this subwoofer provides the low-end punch needed for moderate-size home theaters and multi-room applications.

Proposition 65 Warning for California Residents

Episode® Passive In-Wall Subwoofer with Single 8 in. Woofer

The ES-SUB-IW-SNGL8 is the perfect solution for both retrofit and new construction applications. Built around the same world-class 8" Woven Fiberglass woofer that is found in its larger dual 8 sibling, this subwoofer provides the low-end punch needed for moderate-size home theaters and multi-room applications.

Backbox Considerations

This subwoofer is designed to use the wall cavity as its backbox. Typical 2x4 construction spaced 16”-on-center will create roughly 3 cubic feet of airspace in an 8’ tall wall cavity – perfect for retrofit subwoofer applications. It is optimized to work in as little as 1 cubic foot of airspace, which is equivalent to a 2.5’ tall wall cavity should you use a fireblock or purlin in new construction.

World-Class Engineering

Don’t be fooled by the fact this is an in-wall subwoofer. You see, this little guy features the same woofer found in its dual 8" sibling. It features an 8" Woven Fiberglass Sandwich cone, Nomex Spider and high temperature voice-coil. Optimized for outstanding audio performance, this subwoofer delivers realistic bass with a punch unmatched by the competition.

Retrofit-Friendly

No in-wall subwoofer is easier to install! Just use the supplied template to cut an opening in the drywall, connect speaker wire to the gold-plated spring terminals and zip the dog toggles into place.

Reinforced Bezel

To handle the power of this woofer, our engineers designed a custom bezel with reinforced ribs that won't flex or wobble under pressure. The result is clean, accurate bass!

Locking Grill

The force created by this woofer was so great our engineering team wasn't able to use a conventional friction-fit grill - so they designed a new one! By adding small bump-outs to the grill and accompanying recesses in the plastic bezel, it stays put even when rocking the house! There's even the nice finishing touch of fiberglass tape for a smooth fit - and to prevent rattles.