For screen reader problems with this website, please call208-746-33812 0 8 7 4 6 3 3 8 1Standard carrier rates apply to texts.

Hertz Mille MPK 1650.3 PRO Car Audio Speakers System-MPK1650.3

Model #: MPK1650.3
299658
Hertz
At a Glance

The MPK 1650.3 car audio speakers system is the top of the range two way system of the Mille PRO line. The system uses the 28 mm diameter MP 280.3 tweeter inheriting all the technological features of the Mille Legend ML28.3.

Available in Store Only
$699.99Save
$699.99

Get to know this product.

The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 O impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 O stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.

The crossover MPCX 165.3 creates the optimal tone balance between the MP 28.3 tweeter and MP 165P.3 woofer. It features bi-metallic capacitors with polyester dielectric, for maximum acoustic transparency and air wound inductors built on pure copper wire with up to 1mm diameter eliminating saturation. It also mounts wire-wound type resistors with low parasite inductance. The two positions Hi-Contour control provides the ability to fine tune the system frequency response optimizing it according to the different speakers positions. Most of all, the listeners can achieve their favorite sound thanks to the three-position control for the tweeter emission level with 2 dB steps (+2/0/-2dB) attenuation.

  • Power Handling - Peak W: 250
  • Power Handling - Continuous W: 125
  • Impedance ?: 3
Specifications

General

Power Handling - Peak W250
Power Handling - Continuous W125
Impedance ?3
Frequency response Hz45 ÷ 25k
Sensitivity dB SPL93
Voice coil Ø mm (in.)25 (1)
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)35 (1.38)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer conePressed-pulp cone with cotton fibers
Tweeter domeTetolon
Crossover type2 Way Passive Crossover
Crossover cut off3 kHz (Hi-Cont. = ON) , 4 kHz (Hi-Cont. = OFF)

Misc. Specs

Impedance3 ohms
Woofer Size6.5
Car Speaker Size6.5
Mounting Hardware IncludedYes
Rms Power Handling125
Water ResistantNo
Peak Power Rating (Watts)250
WarningProposition 65 Warning for California Residents