For screen reader problems with this website, please call208-746-33812 0 8 7 4 6 3 3 8 1Standard carrier rates apply to texts.

Steiner's Audio Video

Steiner's Audio Video

208-746-3381

Audioengine Satin Black 2.75" Bluetooth Wireless Speakers

Model #: HD3-BLK

$349.00

At a Glance

The HD3 premium powered speakers are a mini home music system with high-fidelity stereo sound for smaller spaces and desktops. Stream your music in seconds from any app or device via high-definition Bluetooth.

WarningProposition 65 Warning for California Residents
Audioengine Satin Black 2.75" Bluetooth Wireless Speakers

Connections

Connector TypeMicro-USB

Other

Sold AsPair

Features

Volume ControlYes
BluetoothYes

Construction

Enclosure TypeThick MDF Cabinet
Tweeter CompositionSilk Dome
Woofer CompositionKevlar® Cone

Misc. Specs

Product Weight (lbs.)7.4
Frequency Response65Hz-22kHz +/-2.0dB
Enclosure MaterialThick MDF Cabinet
Color Finish NameSatin Black
Manufacturer Warranty3 Year
Number of USB PortsYes
RMS Power Handling (Watts)15
ColorBlack
USB PortYes
Depth (in.)5.5
Height (in.)7
Width (in.)4.25
Woofer Size2.75"

Specifications

ColorSatin Black
Type2.0 powered multimedia speaker system
Amplifier TypeDual analog class A/B monolithic
Power Output60W peak power total (15W RMS / 30W peak per channel), AES
Drivers2.75″ aramid fiber woofers, 3/4″ silk dome tweeters
Inputs3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth
OutputsRCA variable line-out, 3.5mm mini-jack headphone out
Mains Voltages110-240V 50/60Hz auto-switching
SNR>95dB (typical A-weighted)
THD +N<0.05% at all power settings
Crosstalk<50dB
Frequency Response65Hz-22kHz +/-2.0dB
Freq. Response W/Bass Reduction Switch Selected100Hz-22kHz +/-2.0dB (-5dB down)
Input Impedance5K ohms unbalanced
ProtectionOutput current limiting, thermal over-temperature, power on/off transient protection
Headphone Amp TypeOPA2134
Full-Scale Headphone Output Level2.0V RMS
Output Impedance2 ohms
Recommended Headphone Impedance Range10 ohms to 10K ohms
Internal D/A ConverterPCM 5102
Input Bit Depth24-bits, upsampled
Bluetooth Receiver TypeBluetooth 5.0 audio
Supported CodecsaptX HD, aptX low latency, aptX, AAC, SBC
Wireless Operation RangeUp to 100ft (30m) typical
Input Data RateDetermined by Bluetooth
Wireless Latency~30 milliseconds (ms)
Connector TypeMicro-USB
USB Device ClassUSB 1.1 or above
Internal D/A ConverterPCM 5102
Input Bit Depth24-bits, upsampled
Input Data Rate44.1KHz/48KHz
Dimensions (each)7″(H) x 4.25″ (W) x 5.5″ (D)
Weight (LEFT speaker)1.8Kg/4lbs
Weight (RIGHT speaker)1.5Kg/3.4lbs
Shipping Weight4.5kg/10lbs per pair
Shipping Box Dimensions11.6″ (29.5cm)H x 11.75″ (30cm)L x 8.8″ (22.5cm)W
Environmental RequirementsOperating temperature: 32 degrees F to 95 degrees F; Non-operating temperature: -4 degrees F to 113 degrees F; Relative humidity: 5% to 95% non-condensing

Audioengine Satin Black 2.75" Bluetooth Wireless Speakers

Model #: HD3-BLK
Available in Store Only
$349.00

At a Glance

The HD3 premium powered speakers are a mini home music system with high-fidelity stereo sound for smaller spaces and desktops. Stream your music in seconds from any app or device via high-definition Bluetooth.

Get to know this product.

Every App Every Device-Wireless That Really Works

Our most-versatile wireless Bluetooth speakers. HD3 Wireless Speakers work with all your apps, music, and devices so no matter how you listen, HD3 has you covered. The ultimate mini music system with wireless that works.

Why You'll Love Them - Benefits

Small speakers with a big sound that fills any room

Premium Bluetooth wireless that works with all your devices and apps

High-end sound wrapped in hand-built wood cabinets

Simple setup, no receiver needed

No network setup, no passwords, no hassle

No buttons to push & inputs are always ready to go

Front panel volume control and headphone jack

Set Up In Seconds. Simple. No Hassle. Easy To Use.

The HD3 Wireless Speakers are small desktop speakers with a surprisingly large sound for their size.

No network setup, passwords to enter, or buttons to push. Setting up these speakers is so easy you’ll be rocking in no time. Keep your music fun, easy, and sounding great.

Small Speakers Big Sound. Surprisingly Loud

Don’t let their size fool you as this little speaker is packed with much more sound than you would expect.

The HD3 Wireless Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, Premium Bluetooth aptX-HD, and built-in power amps wrapped in precision-tuned, hand-crafted cabinets. Clear, full and powerful audio that fills almost any room.

Go Old School. Analog, Baby!

Audioengine wireless speakers are special. Their built-in analog power amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands. A whole new audio experience, guaranteed.

Useful Documents
Specifications

Connections

Connector TypeMicro-USB

Construction

Enclosure TypeThick MDF Cabinet
Tweeter CompositionSilk Dome
Woofer CompositionKevlar® Cone

Features

Volume ControlYes
BluetoothYes

Other

Sold AsPair

Specifications

ColorSatin Black
Type2.0 powered multimedia speaker system
Amplifier TypeDual analog class A/B monolithic
Power Output60W peak power total (15W RMS / 30W peak per channel), AES
Drivers2.75″ aramid fiber woofers, 3/4″ silk dome tweeters
Inputs3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth
OutputsRCA variable line-out, 3.5mm mini-jack headphone out
Mains Voltages110-240V 50/60Hz auto-switching
SNR>95dB (typical A-weighted)
THD +N<0.05% at all power settings
Crosstalk<50dB
Frequency Response65Hz-22kHz +/-2.0dB
Freq. Response W/Bass Reduction Switch Selected100Hz-22kHz +/-2.0dB (-5dB down)
Input Impedance5K ohms unbalanced
ProtectionOutput current limiting, thermal over-temperature, power on/off transient protection
Headphone Amp TypeOPA2134
Full-Scale Headphone Output Level2.0V RMS
Output Impedance2 ohms
Recommended Headphone Impedance Range10 ohms to 10K ohms
Internal D/A ConverterPCM 5102
Input Bit Depth24-bits, upsampled
Bluetooth Receiver TypeBluetooth 5.0 audio
Supported CodecsaptX HD, aptX low latency, aptX, AAC, SBC
Wireless Operation RangeUp to 100ft (30m) typical
Input Data RateDetermined by Bluetooth
Wireless Latency~30 milliseconds (ms)
Connector TypeMicro-USB
USB Device ClassUSB 1.1 or above
Internal D/A ConverterPCM 5102
Input Bit Depth24-bits, upsampled
Input Data Rate44.1KHz/48KHz
Dimensions (each)7″(H) x 4.25″ (W) x 5.5″ (D)
Weight (LEFT speaker)1.8Kg/4lbs
Weight (RIGHT speaker)1.5Kg/3.4lbs
Shipping Weight4.5kg/10lbs per pair
Shipping Box Dimensions11.6″ (29.5cm)H x 11.75″ (30cm)L x 8.8″ (22.5cm)W
Environmental RequirementsOperating temperature: 32 degrees F to 95 degrees F; Non-operating temperature: -4 degrees F to 113 degrees F; Relative humidity: 5% to 95% non-condensing

Misc. Specs

Product Weight (lbs.)7.4
Frequency Response65Hz-22kHz +/-2.0dB
Enclosure MaterialThick MDF Cabinet
Color Finish NameSatin Black
Manufacturer Warranty3 Year
Number of USB PortsYes
RMS Power Handling (Watts)15
ColorBlack
USB PortYes
Depth (in.)5.5
Height (in.)7
Width (in.)4.25
Woofer Size2.75"
WarningProposition 65 Warning for California Residents